Now that I have finally picked up each Nintendo Classic Mini, here they all are with the original consoles.
Now that I have finally picked up each Nintendo Classic Mini, here they all are with the original consoles.
I’m a great believer in game box protectors. With vintage games only getting older, anything that helps them (and their related paraphernalia) to stay in great condition without being fully archived is a great investment.
I recently got some box protectors for my Japanese Game Boy/Game Boy Color games. There are two sizes for Japanese Game Boy games, the original size which are very small, and a later size which is about 4/5 of the ‘standard’ Famicom box size. This later size continued through the Game Boy Color era too.
Previously I had stored my small Japanese Game Boy games in Japanese Game Boy Advance protectors, which were okay in one direction, but way too big in the other two.
Similarly, I kept my larger Japanese Game Boy games in Famicom box protectors, which was a closer fit but still quite a lot of room at the top.
It’s great to finally have my Game Boy games secure in snug fitting protectors.
I was glad to find these Japanese Game Boy sizes, as a good fit is important for protection. It’s hard (or impossible) to find decent box protectors for less common box sizes, so here are some adaptations of sizes designed for other purposes that I use. While usually not perfect, they are good enough for solid protection without too much internal movement.
Japanese Game Boy Advance size works very well for the ‘mid size’ Famicom boxes
Only a small amount of room to move.
NES protectors work nearly perfectly for the large size Konami Famicom games.
The unique Gun Sight box is nearly an exact match for Euro NES size protectors.
Famicom protectors work okay for small SG1000 games. It’s not really the right size in any direction and is very tight, but protects okay.
And finally, I’ve recently tried Nintendo 64 cartridge protectors on my small box Famicom games.
The fit is not perfect, much like the SG1000 games in large box Famicom protectors, they’re too tight in thickness, but too large in other directions, so they fit, but are somewhat tight. Until there is a better option, it’s a decent solution.
I had customs done for all these SG1000/Mark III box sizes. It’s a fully one off for Alex Kidd BMX (it’s the only box of that size), but a few each for the two card game sizes and big box Mark III gold.
Unfortunately the producer of these customs has quit the business, so I’m on the lookout for a new producer, if anyone knows of one!
After a few years of working toward it, I’ve finally collected all the first party ‘small box’ Famicom games.
This is the first ever line of Nintendo console games, covering the Famicom’s 1983 launch through most of 1984.
This set as a whole is often confused with the slightly smaller ‘pulse label’ games line, which features the pulse motif for the cartridge label on each game.
This confusion is common because unfortunately everything doesn’t quite line up perfectly, design-wise. The small box set includes all pulse label titles except one (Devil World, which came in the later standard Famicom larger box). And all small box games are also pulse label titles, except for the three gun games – Duck Hunt, Hogan’s Alley and Wild Gunman, which have the cover illustration on the cart.
So there’s the pulse line set, and the small box set, which almost completely overlap but unfortunately (for those with OCD) not 1:1.
Of course, this is not all small box Famicom games, as many third parties’ initial lines came in the same size. Here’s my Hudson, Taito, and Namco games added to my Nintendo set.
Interestingly, while Konami were there on the Fami in this era (1984), and they followed the initial Nintendo box design motif closely, they skipped the small box size and went straight to a medium size for their initial set of games, the Konami ‘orange box’ line. I charted the rest of the Konami Famicom box design evolution in this article.
So what’s next? I guess I should get around to picking up Devil World to complete the pulse label set, for one.
You’ve likely heard the story of R.O.B. ‘The Robotic Operational Buddy’ for the NES. The story usually goes like this: when Nintendo wanted to bring their successful Family Computer console to America in 1985, the stores wouldn’t take it because they were afraid of losing money on video games, as there had just been a big video game market crash. So in order to get toy stores to stock the console, Nintendo initially bundled the NES with a toy robot and marketed it as an electronic toy instead.
Some of the story might be true, but R.O.B. was actually released in Japan first, as the Family Computer Robot.
Nintendo was a toy company before they were a games company, and there were many existing examples of the company combining electronics and toys before this. Among the most notable are the original electro-mechanical light gun games: at home (Electro Safari and Electro Bird) and in the arcade (the original versions of Wild Gunman and Duck Hunt).
So really, the robot and its accessories were just part of a long toy/game continuum that continued throughout the Famicom era with peripherals like the Power Pad and all the way through to today with Amiibo and Labo.
The games that were compatible each came with a veritable toybox of additional parts, and are essentially complex mechanical games that use the robot as a central item. Only two games were released, Robot Block and the more elaborate Robot Gyro.
The Family Computer Robot uses pretty much identical technology to the light guns of the day, but in reverse, so instead of the screen responding to the peripheral, the peripheral responds to the screen. Like light guns it relies on the screen scanning display technique of a cathode ray tube, and so will not work on modern fixed pixel screens, even via a scaler.
So for robot games, a CRT is required, luckily I keep one on hand for just such an occasion.
Essentially the robot needs to be positioned so he can see the screen clearly in order to respond to the commands he is sent.
The robot can receive commands from the screen and execute a simple movements based on them. He can move his arms up and down, left to right, and can open and close his grip. This movement set allows him to pick up and move objects.
The two games approach the concept of ‘robot which can pick up items’ differently. Robot Block primarily makes the physical element of the game the primary one, integrating the Famicom software into the mechanical game. Robot Gyro is essentially a regular video game which includes the robot (and gyro) functionality as a physical gimmick.
Robot Block (ロボット ブロック)
Robot Block is the simplest of the two games, in both set-up and software. It comes with a series of attachments which are slotted into the robot’s base, some discs which sit in these attachments and can be stacked on each other, and some hand attachments which can grip the discs.
The physical game involves manoeuvring the robot to pick up the discs and stack them in a particular order.
The game itself features a robot testing tool, and three game modes: Direct, Memory and Bingo.
All the games involve a little professor jumping around the interface. Direct is the simplest, you have to stack up the discs in a certain order as shown on the screen.
In Memory you must set up a series of moves for the robot to execute in order to achieve the required physical result. Bingo is a one or two player game where you have to fill in rows or columns in order to execute commands.
Essentially the software is useless without the accessories, since it’s really just a tool that is used to play with the robot and pieces. It’s also not very fun beyond the 80s robot novelty.
Robot Gyro (ロボット ジャイロ)
Robot Gyro is both the better game, and has the better toys. It also has a much more elaborate set-up. First of all there is a bracket on which the Famicom player II controller sits, with a levered mechanism which can hit the A and B buttons.
There is a powered gyro spinner which gets two tops spinning at high speed.
The robot can pick up the tops from the spinner…
…manoeuvre them over the button levers…
…and release, which presses down on the matching button on the controller.
There’s also a slot over on the right to keep the second top when not in use.
Here’s a closer look at the mechanism to hit the buttons. The mechanisms are coded in blue and red, which ties into the game.
The set up is actually a pretty fun toy in and of itself, due to the spinning tops being pretty fun and the whole set-up being nicely done. But what about the game?
Well it’s a pretty standard 80s puzzle action platformer (think Lode Runner or Crazy Castle), where the same professor character from Robot Block has to collect all the dynamite in the stage while avoiding the critters.
The gimmick is that the stages are full of red and blue pipes which move up and down when the red and blue switches have been hit. In order to get the robot to do this, you essentially pause and issue instructions. It can often take several moves for the robot to slowly get the top to the right button.
Actually playing with the robot is tedious, but the game itself is a decent puzzler if played without it in two player (with the other player hitting A and B). So while the robot toys are fun to play with, and the game is decent, together they are less than the sum of the parts.
Overall, while not being the most fun games to play on the Famicom, the Family Computer Robot games are fun pieces connecting Nintendo’s toy and video game eras.
In sad news, famous Tokyo game store TV Games Maya closed on April 8 after 35 years.
Run by shop manager Hisako Akitani as a family business, the run has finally come to an end due to her retirement. It’s crazy to think the shop has been running since around the launch of the Famicom.
GameCenter CX’s main man Arino hosted an event on the final day, and many famous names in the Japanese game industry paid their respects for such a long-running business.
I just wish I had bought this sweet Famicom design gaming chair last time I was there!
In preparation for Nintendo’s return to producing toys made out of cardboard, I thought I should try out a similar item in my vintage Nintendo collection. In 1974 Nintendo entered the paper craft market, with a series of simple cardboard DIY projects known as the Nintendo Paper Model series (ペーパーモデル).
There are dozens of designs available and I personally own around 15.
My favourite is probably the Johnny Walker licensed bus, but most of the houses look quite nice too.
Since I was going to open an item that had been in the packaging for 44 years, I wondered if my niece Emma was interested in helping…
…I took that as a yes.
We started after dinner. Emma chose the French Castle (フランスのお城 – Furansu o-jo) as our project.
In a nice coincidence 城 is one of the first Kanji I was able to recognise thanks to 悪魔城ドラキュラ(Demon Castle Dracula) – the Japanese name for Castlevania!
Here is the card laid out. It is not pop-out and requires some intricate cutting and gluing.
It was here that we realised this was actually much too fiddly for young kids. I had to do many of the cuts with a knife, and assembly was also going to be very fine work. Emma kept drawing while I did most of the grunt work (continuing after Emma’s bedtime), and we glued it together the next day.
The final result: not bad!
The design seems largely based on Château d’Azay-le-Rideau, which is situated on a river.
As such, Emma grabbed some extra paper from her craft supplies and prepared some grounds and a pond, complete with reeds and ducks.
Final result with grounds and pond:
All in all, we had a decent evening/afternoon of fun. But here’s hoping Labo will be easier for kids to be involved at each step!
Another update on this article on my now never-ending quest to collect a series of Konami Famicom character cards from the 80s.
Recap: at some point starting in 1987, Konami decided to include a collector card with all their Famicom titles. Each card had an illustration related to the game; some cards featured screenshots or pieces of screenshots, others had artwork of scenes in the game.
Last time I decided I was done, having collected a card for 19/20 of the games which came with a card. The missing game was Exciting Boxing (エキサイティングボクシング), which while I’d managed to get a hard-to-find boxed copy of it to complete my complete boxed Konami Famicom collection, I’d never seen one with a card outside of complete large box copies which come with a novelty inflatable controller and cost a fortune when they appear.
But one lucky day I found a regular small boxed game with the card. And now I have a card for all twenty of the games that came with one!
On top of this, I picked up a beautiful near mint copy of Dragon Scroll (ドラゴンスクロール) in Ikebukuro, which came with a different card to the one I had, so now I have entered the murky waters of collecting multiple cards per game.
This Japanese site (which I found because it flatteringly used this site as a source) has nicely collated most of the available cards, so this journey may go for many more years. Another great site Video Game Den also has good info on the available cards.
So here is my updated card set:
The whole collection, with cards: